GE NX-10 Installer Manual Download Page 19

Page: 19 / 257

NX-10 Installers manual

The NX-10 keypad has the following key layout out-of-the-box:

Figure 4. Default keypad layout.

F1 F2 F3 F4

F7 F8

The four top-row keys with the blank keycaps can be replaced by the installer, as they are supplied
with the keypad for this purpose.

Figure 3

shows the keypad with the optional function keycaps

placed in their default positions (factory setting). Optional keycaps available for assigning to the four
programmable keys are:

Keycap symbol

Name

Default factory setting

PANIC F1

FIRE F2

MEDICAL F8

NIGHT MODE

CANCEL Not

assigned

Note:

The function keycaps can be placed randomly over the four available positions. Actual function activation is

accomplished through a menu option during installation.

For more information about programming function keys F1 to F8, see

Programming the function

keys

on page 145.

Table 3. Key functions

Arm Away

Press to arm the system.

Note:

Exact behavior of this key depends on the system settings configured by the

installer. For more information, see the

Master Keypad

, and the

Quick Arm

option descriptions in the glossary.

Arm Stay

Press to arm the system in Stay mode.

Note:

For this mode to work correctly, interior zones must be set. You can also

configure this key to toggle the Stay/Instant mode of the armed partition. For more
information on this button behavior, see the

Master Keypad

Instant Stay Toggle

, and

the

Quick Arm

menu option description in the glossary.

When in the menu:

Summary of Contents for NX-10


































































































































































































































































Search results

Summary of Contents for NX-10

Reviews:

Related manuals for NX-10

Brands by name

Popular brands

GE NX-10, Installer Manual

Search results

Summary of Contents for NX-10

Reviews:

Related manuals for NX-10

Brands by name

Popular brands