NX-10 Installers manual
151
operation.
CAUTION:
Batteries can explode or cause burns when recharged, incorrectly (dis)assembled, or exposed to
fire or high temperatures. Dispose of used battery according to battery directive instructions
and/or as required by local laws. Keep away from children.
Only replace the batteries with Energizer or Duracell AA batteries. Do not use a different type of
batteries. Always use batteries that are from the same batch, and always replace all batteries
with fresh ones simultaneously.
Master mode
You can program a keypad to act as a single-partition keypad or a master keypad by default. A
single-partition keypad allows the user to arm one partition only while a master keypad allows the
user to arm one or more partitions. A user with appropriate rights can change a single-partition
keypad to a master keypad and vice versa.
1.
Navigate with the
½¾
keys to
This Keypad>Keypad Features
>
Master Keypad
and press
OK
.
•
Select
Yes
to set the keypad as a master keypad by default.
•
Select
No
to set the keypad as a single-partition keypad by default.
2.
Press
OK
to save the setting.
3.
The keypad beeps once to confirm the change and returns to
Master Keypad
.
Assigning X-10 devices
The keypad can be used to activate selected X-10 devices. The following example programs the unit
code (3) and house code (L) for device 1.
1.
Navigate with the
½¾
keys to
This Keypad>Keypad Features>Advanced Options>Light
Control>Device 1
and press
OK
.
2.
Scroll to
Unit Code
and press
OK
.
3.
Select
3
and press
OK
.
4.
The keypad beeps once to confirm the change and returns to
Unit Code
.
5.
Scroll to
House Code
and press
OK
.
6.
Select
L
and press
OK
.
7.
The keypad beeps once to confirm the change and returns to
House Code
.
Copying keypad settings
The current keypad settings can be copied to one or multiple keypads in the system. The following
example copies the current keypad settings to another keypad in the system.
1.
Navigate with the
½¾
keys to
This Keypad>Copy Keypad>To One Keypad
and press
OK
.
