Service Setup
Then the results of the test are displayed.
• The test passes if the following message is displayed in the window:
Passed
.
• The test fails if the following message is displayed in the window:
Failed
.
If the
Internal Modem Test
fails, do the following:
a.
Replace the internal modem as described in
b.
Rerun the
Internal Modem Test
.
c.
If the test still fails, replace the PWA as described in
, and enable the modem option.
5.
When the test is done, press
Cancel
to close the results window.
Testing the USB Port
Use the
USB Test
to test the USB port.
1.
Open the
Diagnostic Tests
window as described in
page 46
2.
Connect a USB keyboard to the USB port on the rear panel of the device.
NOTE:
The USB keyboard used for this test must match the language that is
selected in setup.
3.
Select
USB Test
.
The following window opens:
4.
Press any key on the USB keyboard and verify pass or fail:
• If the character that appears in the
Character Input
field matches the key
you pressed, the test passed.
• If the character does not match the key you pressed, or no character appears
in the
Character Input
field, the test failed.
58
MAC™ 2000 ECG Analysis System
2053535-003C
Summary of Contents for MAC 2000
