manualshive.com logo in svg

GE F35, Instruction Manual

Looking for an Instruction Manual for your GE F35? Look no further! You can easily download the free manual for the GE F35 from manualshive.com. This comprehensive guide provides step-by-step instructions to help you make the most of your product, ensuring a seamless and hassle-free experience.

Share
Download
background image

5-166

F35 MULTIPLE FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL

PRODUCT SETUP

CHAPTER 5: SETTINGS

5

The pushbutton is reset (deactivated) in latched mode by asserting the operand assigned to the 

PUSHBTN 1 RESET

 

setting, by directly pressing the active front panel pushbutton, or with the graphical front panel interface.
It can also be programmed to reset automatically through the 

PUSHBTN 1 AUTORST

 and 

PUSHBTN 1 AUTORST DELAY

 

settings. These settings enable the autoreset timer and specify the associated time delay. The autoreset timer can be 
used in select-before-operate (SBO) breaker control applications, where the command type (close/open) or breaker 
location (feeder number) must be selected prior to command execution. The selection must reset automatically if 
control is not executed within a specified time period.

•

Self-reset mode

 — In self-reset mode, a user-programmable pushbutton can be set (activated) by asserting the 

operand assigned to the 

PUSHBTN 1 SET

 setting, by pressing the front panel pushbutton, or by the graphical front panel 

interface. A pushbutton remains active for the time it is pressed physically or pressed in the graphical front panel 
interface, plus the dropout time specified in the 

PUSHBTN 1 DROP-OUT TIME

 setting. If the pushbutton is activated via 

FlexLogic, the pulse duration is specified by the 

PUSHBTN 1 DROP-OUT TIME

 only. The time the operand assigned to the 

PUSHBTN 1 SET

 setting remains On has no effect on the pulse duration.

The local and remote operation of each user-programmable pushbutton can be inhibited through the 

PUSHBTN 1 LOCAL

 

and 

PUSHBTN 1 REMOTE

 settings. If local inhibit is applied, the pushbutton ignores set and reset commands executed 

through the front panel pushbuttons. If remote inhibit is applied, the pushbutton ignores set and reset commands 
executed through FlexLogic operands.
The inhibit functions are not applied to the autoreset feature. The inhibit function can be used in SBO control operations to 
prevent user-programmable pushbutton activation and ensuring “one-at-a-time” select operation.
The inhibit functions can also be used to prevent pushbutton activation from the accidental pressing of the front panel 
pushbuttons. The separate inhibit of the local and remote operation simplifies the implementation of local/remote control 
supervision.
Pushbutton states can be logged by the event recorder. User-defined messages can also be associated with each 
pushbutton and displayed on standard and enhanced front panels when the user-programmable pushbutton is activated, 
and when in the latched mode when the user-programmable pushbutton is deactivated. With the graphical front panel 
interface, instead of messages, the status of user-programmable pushbuttons can display on a single-line diagram and 
can also display in annunciator page windows and in actual values page cells.
For the graphical front panel, the pushbuttons 1 to 8 are linked to the eight physical pushbuttons, and pushbuttons 9 to 16 
are mapped to the graphical interface pushbuttons. To set the buttons for pushbuttons 9 to 16, access 

Settings > Product 

Setup > Graphical Panel > Single Line Diagram Editor

, click the PB symbol in the toolbox, then configure pushbuttons 9 to 

16.

PUSHBUTTON 1 FUNCTION

 — This setting selects the mode of the pushbutton (Self-Reset, Latched, Disabled). If set to 

“Disabled,” the pushbutton is not active and the corresponding FlexLogic operands (both “On” and “Off”) are de-asserted. If 
set to "Latched," the pushbutton remains on until reset.

PUSHBTN 1 ID TEXT

 — This setting specifies the top 20-character line of the user-programmable pushbutton message and is 

intended to provide ID information of the pushbutton. See the User-definable Displays section in this chapter for 
instructions on how to enter alphanumeric characters from the keypad. On a graphical front panel, this setting instead 
controls the label of the user-programmable pushbutton component on single-line diagrams.

PUSHBTN 1 ON TEXT

 — This setting specifies the bottom 20-character line of the user-programmable pushbutton message 

and is displayed when the pushbutton is in the “on” position. For example, the text displays in the Event Record. See the 
User-definable Displays section for instructions on entering alphanumeric characters from the keypad. On a graphical 
front panel, this setting instead controls the on status text of the user-programmable pushbutton component on single-
line diagrams. This setting is not applied to the physical pushbuttons on the graphical front panel.

PUSHBTN 1 OFF TEXT

 — This setting specifies the bottom 20-character line of the user-programmable pushbutton message 

and displays when the pushbutton is deactivated and the 

PUSHBUTTON 1 FUNCTION

 is “Latched.” A message does not 

display when the 

PUSHBUTTON 1 FUNCTION

 is “Self-reset” as the pushbutton operand status is implied to be “Off” upon its 

release. The length of the “Off” message is configured with the 

PRODUCT SETUP 



 DISPLAY PROPERTIES 

 FLASH MESSAGE 

The pulse duration of the remote set or local front panel pushbutton must be at least 50 ms to operate the 
pushbutton. This allows the user-programmable pushbuttons to properly operate during power cycling events and 
various system disturbances that can cause transient assertion of the operating signals.

Summary of Contents for F35











































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for F35

CAME G5000 Installation, Operation And Maintenance Manual preview
G5000
Brand: CAME Pages: 32
Babybee Prams Comet Instruction Manual preview
Comet
Brand: Babybee Prams Pages: 21
Fanimation BTCR9 Quick Start Manual preview
BTCR9
Brand: Fanimation Pages: 2
M2M C600 Technical Manual preview
C600
Brand: M2M Pages: 24
Hama Thunder V18 Instruction Manual preview
Thunder V18
Brand: Hama Pages: 12
Hama Thunder V18 Operating Instruction preview
Thunder V18
Brand: Hama Pages: 12
Hama Mini V3 Rumble Operating Instruction preview
Mini V3 Rumble
Brand: Hama Pages: 14
Hama Dual Vibration Operating Instruction preview
Dual Vibration
Brand: Hama Pages: 8
U.S. Divers Impulse Service & Repair Manual preview
Impulse
Brand: U.S. Divers Pages: 22
Balboa Water Group BP500 Troubleshooting Manual preview
BP500
Brand: Balboa Water Group Pages: 88
ABB A3 Series Instruction Sheet preview
A3 Series
Brand: ABB Pages: 2
Universal Remote Genesis MX-900 Manual preview
Genesis MX-900
Brand: Universal Remote Pages: 20
Savant SKL-3040-00 Quick Reference Manual preview
SKL-3040-00
Brand: Savant Pages: 2
ICP DAS USA ALM-04-MRTU User Manual preview
ALM-04-MRTU
Brand: ICP DAS USA Pages: 26
National Instruments cRIO-FRC II User Manual And Specifications preview
cRIO-FRC II
Brand: National Instruments Pages: 22
AC Tech SCF SERIES Quick Reference Manual preview
SCF SERIES
Brand: AC Tech Pages: 2
V-TAC VT-2472 Manual preview
VT-2472
Brand: V-TAC Pages: 2
Diamond Systems Pyxis-MM User Manual preview
Pyxis-MM
Brand: Diamond Systems Pages: 15

Brands by name

Popular brands

Load more brands