GE CARESCAPE Monitor B850 Service Manual Download Page 43

Page: 43 / 192

System introduction

2106778-001

3.8 User interface symbols

The following symbols appear in the software user interface

Alarm off indicator.
The symbol may not display at the central station or on a remote bedside
monitor.

Alarm priority indicator: High (red). Indicates a high priority alarm.

Alarm priority indicator: Medium (yellow). Indicates a medium priority
alarm.

Alarm priority indicator: Low (cyan). Indicates a low priority alarm.

Alarm volume icon. Adjust the minimum alarm tone volume.

Audio alarms off indicator.

Audio alarms paused indicator with countdown timer - Indicates all audio
alarms are paused and the amount of time remaining for the alarm pause
period displays as a countdown timer.

Pause audio alarms - Selectable from the monitor’s main menu. Also an
indicator of a temporarily paused active audio alarm.

Low priority audio off alarm indicator.

General warning sign. Displays when the priority setting
deviates from the recommendation of international alarm safety
standards.

Reminder volume icon. Adjust the volume of the tone that sounds every
two minutes when audio alarms are turned off.

Touch volume icon. Adjust the volume of the tone that sounds when a
user touches a touchscreen display.

Home icon. Close all menus/applications displayed on the patient
monitor.

Summary of Contents for CARESCAPE Monitor B850

































































































































































































Search results

Summary of Contents for CARESCAPE Monitor B850

Reviews:

Related manuals for CARESCAPE Monitor B850

Brands by name

Popular brands

GE CARESCAPE Monitor B850, Service Manual

Search results

Summary of Contents for CARESCAPE Monitor B850

Reviews:

Related manuals for CARESCAPE Monitor B850

Brands by name

Popular brands