GE CARESCAPE Monitor B850 Service Manual Download Page 45

Page: 45 / 192

System introduction

2106778-001

PDM battery gauge indicator. Indicates the charge level of the battery.

PDM battery failure indicator. Indicates the battery is not available for use.

Snapshot indicator. Indicates the event has an associated snapshot.

Beat source indicator.

Respiration indicator. Indicates a breath is detected by the impedance
respiration algorithm.

BIS and Entropy sensor impedance check indicator (gray). Displays for
each sensor as the impedance check is in progress.

BIS and Entropy sensor impedance check error indicator (red). Indicates
the specified sensor failed the impedance check.

BIS and Entropy sensor impedance check passed indicator. Indicates the
specified sensor passed the impedance check.

Completed NIBP volume icon. Adjust the volume of the tone that sounds
when an NIBP measurement result is available.

Manual NIBP icon. Start a manual NIBP measurement.

Nellcor OxiMax SatSeconds indicator. Indicates the amount of time the
SpO

saturation is outside the limits before alarms are generated.

The following symbols appear in the software user interface

Summary of Contents for CARESCAPE Monitor B850

































































































































































































Search results

Summary of Contents for CARESCAPE Monitor B850

Reviews:

Related manuals for CARESCAPE Monitor B850

Brands by name

Popular brands

GE CARESCAPE Monitor B850, Service Manual

Search results

Summary of Contents for CARESCAPE Monitor B850

Reviews:

Related manuals for CARESCAPE Monitor B850

Brands by name

Popular brands