5.2.2
Creating an Intelligent Packing method using ÄKTA avant
150
Introduction
This section contain some additional information to the Section 5.1 Intelligent Packing
of the column with ÄKTAexplorer and ÄKTApilot, on page 63 in this Operating Instructions,
where the Intelligent Packing wizard is presented for ÄKTApilot and ÄKTAexplorer. This
section describes how to create an Intelligent Packing method for ÄKTA avant 150 based
on either GE approved media or custom media.
Creating an Intelligent Packing
method using GE approved
media
This section describes the creation of an example Intelligent Packing method based on
GE approved media. If custom media is selected instead, the method settings allow a
wider range of variables to be defined to optimize the method.
Follow the instruction below to create an Intelligent Packing method based on GE
approved media.
Action
Step
Open the Method Editor module and click on the New method icon.
1
Result: The New Method dialog opens.
84
AxiChrom 50, 70 and 100 columns Operating instructions 28-9331-08 AG
5 Operation
5.2 Intelligent packing of the column with ÄKTA avant 150
5.2.2 Creating an Intelligent Packing method using ÄKTA avant 150
