GE AIR C18, Service Manual-Installation

Page: 27 / 60

—
24
—
Disassembly and Assembly Procedures
8.1 Disassembly Procedures of Indoor Unit
Operating Procedures / Photos Applicable Unit Models: GE AIR C18 IN
Disassemble Front Grill
Manually push the clasp of front grill sub-assy downward to open the
front grill.
（
refer to Figure 8-1
）
Disassemble Front Panel
Manually unplug the socket connector of the guide louver motor
cable and the limit switch cable. Use screwdriver to twist off four
screws and Disassemble the front panel.
（
refer t o Figure 8-2
）
Disassemble Water Tray
Manually unplug the socket connector of motor cable. Use
screwdriver to screw off the screw fixing the temp. sensor and
the motor cable. Push the water level switch cable, water
pump cable and temp. sensor cable aside. Use screwdriver to
screw off the four screws and pull the water tray upward to
remove the water tray.
（
refer to Figure 8-3
）
8
Left Clasp Right
Figure 8-1
Screw
Figure 8-2
Water Tray
Temp.
Sensor
Screw
Figure 8-3