GE HEALTHCARE SEER 1000 Usage Instructions Download Page 53

Page: 53 / 124

2067634-131 Revision E

SEER ™ 1000

Measures after the end of the recording

The recorder automatically turns off when it reaches the set recording time.

CAUTION

LOSS OF DATA - The recorder stores data for at least one week after the end of the
recording.

Make sure that data is transmitted and deleted before assigning the recorder to another
patient.

Turn off the recorder before the end of the recording

NOTE

Without the use of an App, a recording can only be terminated early if the battery is
removed.

If the battery is removed before it was reached the recording time, the recording ends at this point,
but it is, however, stored correctly.

For information about how to end a recording using an App, see "

The tab "Devices

"On page 78

For information about how to end a recording using an App, see "

The tab "Devices

"On page 78

For information about how to end a recording using an App, see "

The tab "Devices

"On page 78

(for iOS Apple App), or page 94 (for Microsoft Windows App).

drop electrodes

CAUTION

AVOIDABLE SKIN IRRITATION HAZARD - In many cases, the electrodes are
very firm after a long-term ECG.

Summary of Contents for SEER 1000





























































































































Search results

Summary of Contents for SEER 1000

Reviews:

Related manuals for SEER 1000

Brands by name

Popular brands

GE HEALTHCARE SEER 1000, Usage Instructions

Search results

Summary of Contents for SEER 1000

Reviews:

Related manuals for SEER 1000

Brands by name

Popular brands