GE HEALTHCARE SEER 1000 Usage Instructions Download Page 87

Page: 87 / 124

Using Microsoft Windows App

2067634-131 Revision E

SEER ™ 1000

tap

Reset the application

in the window

Administrator.

tap

Reset the application

in the window

Administrator.

tap

Reset the application

in the window

Administrator.

tap

Reset the application

in the window

Administrator.

2. Enter the

default administrator password 14,012,013.

2. Enter the

default administrator password 14,012,013.

2. Enter the

default administrator password 14,012,013.

2. Enter the

default administrator password 14,012,013.

3. click in

Register.

3. click in

Register.

3. click in

Register.

4. Confirm the query.

Start the application and change the technician password

NOTE

Make sure that the external Bluetooth adapter is installed.

The application is password protected against inadvertent access the recorder. By registering for
the first time, overwrite the default password and replace it with your new password.

1. Click the application icon to open the Microsoft application

Windows.

Summary of Contents for SEER 1000





























































































































Search results

Summary of Contents for SEER 1000

Reviews:

Related manuals for SEER 1000

Brands by name

Popular brands

GE HEALTHCARE SEER 1000, Usage Instructions

Search results

Summary of Contents for SEER 1000

Reviews:

Related manuals for SEER 1000

Brands by name

Popular brands