GE HEALTHCARE SEER 1000 Usage Instructions Download Page 74

Page: 74 / 124

Using the Apple iOS App

SEER ™ 1000

2067634-131 Revision E

To delete a patient entry, swipe from right to left on the patient input selected. Then tap the
field

Delete,

shown on the right of the entrance.

field

Delete,

shown on the right of the entrance.

field

Delete,

shown on the right of the entrance.

Find device

Once you have selected a patient, the window is displayed

Find device.

Once you have selected a patient, the window is displayed

Find device.

If the recorder is not connected, press the

Event button

until you hear a beep.

If the recorder is not connected, press the

Event button

until you hear a beep.

If the recorder is not connected, press the

Event button

until you hear a beep.

tap

Find device.

tap

Find device.

The recorder's input is displayed in the window

Select accessory.

The recorder's input is displayed in the window

Select accessory.

NOTE

It may take a few seconds to several minutes to find a device. This depends on
how many Bluetooth devices are available in the area and other electronic
conditions.

Tap the recorder's input to select the recorder.

The recorder's input is displayed in the device list.

Summary of Contents for SEER 1000





























































































































Search results

Summary of Contents for SEER 1000

Reviews:

Related manuals for SEER 1000

Brands by name

Popular brands

GE HEALTHCARE SEER 1000, Usage Instructions

Search results

Summary of Contents for SEER 1000

Reviews:

Related manuals for SEER 1000

Brands by name

Popular brands