2067634-131 Revision E
SEER ™ 1000
59
frequency (e.g., WLAN) are used, each of the other nearby. Other devices can also interfere
with the system, even if they meet the CISPR emission requirements.
ATTENTION
When used with the Bluetooth connection, the recorder consumes more electricity and
desired recording time, intensive, can not be achieved.
NOTE
Windows administrators can find more information about the Bluetooth connection in the "
Using
Windows administrators can find more information about the Bluetooth connection in the "
Using
a Bluetooth adapter
"On page 82.
a Bluetooth adapter
"On page 82.
If Bluetooth connection interruptions, try the following:
•
Keep a distance between the apparatus not less than 0.5 m and not more than 10 m.
•
Remove any objects from the line of sight between the two devices.
•
Remove any devices that may interfere with the radio transmission, the proximity of the two
devices.
Once the recorder is connected, the Bluetooth connection remains active until the start of
recording.
NOTE
Do not pull the USB cable during data transfer.
After recording starts, the Bluetooth connection is disabled. It can be activated again during
recording by pressing the event button for more than 3 seconds. This way you can check the
signal quality at any time.
