2067634-131 Revision E
SEER ™ 1000
57
•
define the function with which the data is imported from a recorder and
automatically deleted after imported
Data exchange between the Apps and engravers is wireless.
Privacy policy
For data protection, both Apps use an access control with two password protection levels. On the
first level is used the administrator password and the second level, the password for the ECG
technician. Because these passwords are set, is described in the "
Change the administrator
technician. Because these passwords are set, is described in the "
Change the administrator
password
", Page 62. (App for the Apple-iOS) or page 83 (for PC App).
password
", Page 62. (App for the Apple-iOS) or page 83 (for PC App).
data protection in the App
Only a qualified ECG, which was assigned a
Technical ID,
It has access to the App.
Only a qualified ECG, which was assigned a
Technical ID,
It has access to the App.
Only a qualified ECG, which was assigned a
Technical ID,
It has access to the App.
Only the administrator can enter one
Technician ID
and assign it to a technician ECG.
Only the administrator can enter one
Technician ID
and assign it to a technician ECG.
Only the administrator can enter one
Technician ID
and assign it to a technician ECG.
The ECG technician enters the default password specified in this user's manual and change it
to your personal password. After that, only the administrator can reset the technical password.
Data protection on the recorder
If the data exchange with a recorder has been established through an App, a protection code is
transferred to the recorder, which is automatically generated, using the administrator password.
From there access to the recorder it is only possible with an App with the same administrator
password.
Access is blocked until the patient and the ECG data is downloaded by MARS or CardioDay and
then deleted from the recorder. Thus, ECG technicians, who are supervised by only an
administrator, have, at any time, access to recorders other technical ECG. People outside the
control of the administrator, have no access and, when trying to connect, receive the error
message "The password stored in the recorder does not match the password of the current
administrator."
