Garmin NavTalk Owner'S Manual Download Page 116

Page: 116 / 130

106

Appendix C

Section 6

Messages

SIM Memory Full -

There no space for new numbers.

SMS Inbox Full - Delete Messages -

Remove old messages

from the inbox to allow space for new messages.

SMS Invalid Number -

You have entered the wrong number, re-enter.

SMS Service Center # Invalid -

Re-enter the correct number.

SIM Memory Full

- Delete old data to allow space for new data.

Speed Dial Number Not Assigned -

There is no number in

this speed dial list slot.

To Do List Memory Full -

Delete old data to a low space for

new data.

Too Many Exceptions For Recurrence -

There are too many

date or day mismatches to repeatedly list the event with reli-
ability.

Transfer Complete

- The unit has finished uploading or down-

loading information to the connected device.

URL Invalid -

The URL cannot be authenticated.

URL Timed Out-

Time allowed for display has expired.

URL Too Long -

The URL character string is too long to be

accepted. Delete the http:// prefix and try again.

Verifying -

Checking your code for validity.

Waypoint Already Exists

- The name you selected has already

been assigned. Choose another name.

Waypoint Memory Full

- All of the waypoints have been assigned.

You Bust -

You have exceeded 21 points in the game of Blackjack.

Recurrence Memory Full -

Appointment recurrence memory

is full. Shorten the number of months for posting of recurring
appointments.

Registration Failed

- When using Manual Network Search,

network registration has failed. Try another network entry.

ROM Failed

- The permanent memory has failed and the unit

is not operable. Service is required.

Route Already Exists

- The name you selected has already

been assigned. Choose another name.

Route Memory Full

- No additional route waypoints can be added.

Route Truncated

- A complete uploaded route will not fit into

memory. Modify the route to reduce size.

Session Not Connected -

The Browser session is not currently

connected to the Wireless Application Protocol (WAP). Retry.

Set Voice mail -

Enter a Voice mail Phone Number.

SIM Access Denied -

Re-enter the PIN 1 code.

SIM Blocked

- You have exceeded the three attempts to enter

your PIN Code. See your service provider for a PUK 1 number .

SIM Not Ready

- The SIM Card has not been completely read

by the phone or the SIM card is not installed or is faulty.

NvTlkGSMManual copy.indd 106

12/2/2002, 8:43:44 AM

Summary of Contents for NavTalk



































































































































Search results

Summary of Contents for NavTalk

Reviews:

Related manuals for NavTalk

Brands by name

Popular brands

Garmin NavTalk, Owner'S Manual

Search results

Summary of Contents for NavTalk

Reviews:

Related manuals for NavTalk

Brands by name

Popular brands