MG6000 Series Media Gateway User
’
s Manual
- 80 -
IAD(8)#
show gw-table
--------------------------------------------------------------------------------
No. |Prefix Code|Len |Type|IP Address |Port|Cut |Extra Code |PhoneContext
0 82598555 8 SIP 138.0.0.221 5060 0
--------------------------------------------------------------------------------
Total item:1
5.1.10.4
Routing parameters - PBX parameters
a). Configuration
IAD(8)#
set pbx-para
->DTMF interval(100-2000)[500*10ms]:1000
->Network call timeout(50-6000)[2000*10ms]:2000
->WAN side channels number limit(0-8)[8]:8
->Whether Active DSP Channel after collectting phone number end 'yes'or'no'[no]
Attention
：
If active DSP Channel after collecting phone number end, you will receive the prompt voice immediately.
This case is usually not appearing. The default configuration is disabled; please do not arbitrarily change this
configuration item.
b). Display
IAD(8)#
show pbx-para
DTMF interval: 1000*10 ms
Network call timeout: 2000*10 ms
WAN side channels number limit: 8
Whether Active DSP Channel after collecting phone number end: NO
5.1.11
Digitmap Configuration
Digit map is a form of routing configuration. It based on regular expression, and can configure several routes
once.
a). Configuration
IAD(8)#
set digitmap
->Enable Digit Map(enable will delete all gw-table info) 'yes'or'no'[no]:yes
->Digit Map[[2-9]11|0T|011xxx.T|91[2-9]xxxxxxxxx|[1-8]xx]:
->T Timer[10s]:10
->Routing IP Address[0.0.0.0]:138.0.0.221
->Routing Port(0-65535)[5060]:
Attention
：
If enable the digit map function, originally routing map will be deleted.
