MG6000 Series Media Gateway User
’
s Manual
- 61 -
->Is it need Outputing Data information for debugging ? 'yes' or 'no'[no]:
->Is it need Outputing Trace information for debugging ? 'yes' or 'no'[no]:
->Is it need Outputing Error information for debugging ? 'yes' or 'no'[no]:
Attention
:
a). For this function, two IP addresses was needed by IAD: one (WAN IP) used in public networks,
connecting Internet; the other (LAN IP) used in private networks, connecting with PC and other network devices.
If MG6008 is as the NAT server, the other device which connecting it by LAN port can access the Internet.
b). It is suggest to disable NAT server, because more system resource will be occupied, if enable the NAT
server.
b). Display
IAD(8)#
show nat-server
NAT Server: Disable
Output Data debug information: NO
Output Trace debug information: No
Output Error debug information: No
Account
parameters
a). Configuration
IAD(8)#
set account
->Startup network interface accounting service'yes' or 'no' [no]:
-> Generate phone receipt within gateway'yes' or 'no' [no]:
-> While the connect to the Billing-N(S) was broken, setting right of channel toCLOSED
or not'yes' or 'no' [no]::
-> Use default power'yes' or 'no' [yes]:no
-> Domestic prefix is [0]:0
-> International prefix is [00]:00
-> Hongkong prefix [00852]:00852
->Macap [00853]:00853
->Taiwan prefix [00886]:00886
Domestic prefix is:0,International prefix is:00,Hongkong/Macap/Taiwan prefix is:00852,00853,00886
->Restriction on number exclude prefix'yes' or 'no' [no]:yes
->Prefix Number(',' could be used for separation character,supported five maximally)
[]:8259,8331,12186,1126,190
->Port 0 need phone receipt 'yes' or 'no' [yes]:
->Port 0 permission(0-Closed,1-Limited,2-City,3-Domestic,4-Macao/HK/Taiwan,5-International) [5]:1
-> Port 1 need phone receipt 'yes' or 'no' [yes]:no
->Port 1 permission(0-Closed,1-Limited,2-City,3-Domestic,4-Macao/HK/Taiwan,5-International) [5]:2
-> Port 2 need phone receipt 'yes' or 'no' [yes]:
-> Port 2 permission(0-Closed,1-Limited,2-City,3-Domestic,4-Macao/HK/Taiwan,5-International) [5]:3
-> Port 3 need phone receipt 'yes' or 'no' [yes]:no
-> Port 3 permission(0-Closed,1-Limited,2-City,3-Domestic,4-Macao/HK/Taiwan,5-International) [5]:4
-> Port 4 need phone receipt 'yes' or 'no' [yes]:no