MG6000 Series Media Gateway User
’
s Manual
- 44 -
once.
Click the
“
Digit map
”
, and the
“
Digit Map
”
page will appear, Page shown as 4-16
（
Take MG6008 for
example
）
Fig. 4-15 Digit map page
All kinds of users could enter this page; all the users have the authorization to configure except common
users.
All the digit map parameters which had been modified will take effect immediately except the parameter "T",
but make sure the modified can be applied next time, please save the configuraion, if you have modified the
parameters.
The digit map parameters show as below.
l
Rule
1). Each digit map includes some dial rules
.
2). Each dial rule is separated by
“
|
”
.
3). The symbol "x" which matches any digit ("0" to "9").
4).
“
［］
”
: one symbol between square brackets, for example [7 8 9] means one of symbol among 7, 8 and 9,
and [
２３５－７
*] means one of symbol among
２，３，５，６，７
and *.
5). 011x.
，
the symbol
“
.
”
after
“
x
”
which match some arbitrary digits, so
“
01122
”
,
“
011223
”
,
“
0112234
”
would also have been a match.
6). The symbol
“
T
”
which defines the length in seconds of parameter "T" used in dial plan pattern definitions,
the default value is 10s,for example 1234T means: after dialing "1234" the phone waits T seconds and
then completes the call automatically.
According to rule above, user can construct regular expression of digit map.
l
For example
[2-9]11|0T|011xxx.T|91[2-9]xxxxxxxxx|[1-8]xx
•
[2-9]11:
211
、
311
……
911 are dialled immediately.
•
0T:
Local operator rule: After dialing "0" the phone waits T seconds and then completes the call
