MG6000 Series Media Gateway User
’
s Manual
- 40 -
Fig 4-12number mapping
All kinds of users could enter this page; all the users have the authorization to configure except common
users.
All the digit map parameters which had been modified, will take effect immediately but make sure the
modified parameters can be applied next time, please save the configuraion, if you have modified the parameters.
The parameters of number mapping show as below.
a). There are 100 number mappings at most.
b). It display 10 number mappings in one page, preview other page please click
“
Prev
”
or
“
Next
”
.
c). IAD series products supports 4 kinds of route type: SIP(by IP),TEL connection, FXO connection and
FXO connection, however, The MG6008 just supports SIP(by IP) and TEL connection.
d). The IAD series products support the number with 29 digits at most.
e). The device not only can set fixed number router, but also can cut off the appointed length
’
s number or
automatically add appointed prefix to call by need. The number route mapping
’
s description of Fig. 4-12, shown
as below:
1). According to the first number route mapping, the prefix is 12, number length is 3, so the number 121,
122~129 is match, will sent to the device which IP address is 138.0.0.221.
2). According to the second number route mapping, the IAD will cut off the 3 digit in the front of the
number which prefix is 12395, length of number is arbitrary, and then sent to the device which IP address is
138.0.0.221. So if the user dials the number 12395832, and the number that the IAD sends is 95832.
3). According to the third number route mapping, the IAD will cut off 3 digit in the front of the number
which prefix is 12315,and length is 5, then add 020 in the front, lastly, sent the number to the device which
IP address is 138.0.0.221.So if the user dial the number is 12315, and 02015 will be sent.
f). Generally, the number route mapping should be configured in the case shown as below.
1). Several IAD which haven
’
t been registered call each other.
2). Appoint the route by the prefix.
3). When dial the external line, don
’
t want to dial
‘
#
’
after the number,
4). The dial-up number using the Tel URI format.
