MG6000 Series Media Gateway User
’
s Manual
- 38 -
Figure 4-11 the page of line modify
Super User and Senior User
could enter this page except common user.
Super User and Senior User also
have the
authorization to configure.
a) Phone Config continuous: provides a fast method to set the continuous phone numbers. On some occasion
of application, users need to set continuous phone numbers for several ports in series. When users choose
configuring in series and specifying the first and last port and the first and last numbers, system will distribute
continuous numbers for port. But it
’
s noticed that other parameters only take effect for the first port, the original
configuration of other ports isn
’
t changed
b) Phone Number: When the prefix is not configured, phone number is the extension number, also is the
outside line number. When the prefix is configured, phone number is only the extension number, and the outside
line number is composed by prefix and Phone Number.
c) Calling Name: Optional, generally it is set as the phone number.
Attention
：
a).
“
/
”
,
“
*
”
,
“
$
”
and space can not appear in calling name.
d)
Registered, Authentication Name, Authentication Password:
If register server or proxy server start the
function of authentication, IAD should provide authentication information to them. In this case, the option of
“
Registered
”
must be set
“
yes
”
, and Authentication Name and Authentication Password must be filled out.
e)
Port mode:
Port modes are different base on the port type. FXS port has two port modes: default and
hotline. Default mode is the mode that FXS port connects with the phone. This is the largest application of the
model. If the User set the FXS port mode as hotline, the Hot-line number must be set. After the configuration take
effect, the phone which connects with the port will dial the hotline number automatically when you pick up the
receiver.
f)
Transfer Port (Incoming):
Only can be configured when the port is FXO. For FXS port, transfer port
