MG6000 Series Media Gateway User
’
s Manual
- 10 -
Fig.2-11 Appearance of MG6008 ET
2.3.2
Device front panel
The front panel of each type of MG6008 is different, shown as follows:
Fig.2-12 MG6008 S front panel
Fig.2-13 MG6008 front panel
As shown in Fig 2-13, the front panel indicator shows the working state of MG6008, including POTS
interface of 8 FXS (or FXO) , Ethernet interface and the work state of power.
a) PWR: power supply indicator, green.
Light is on when the device is being supply with power;
b) RUN: Working status indicator, green. Flashing when it
’
s being supply with power. Being on or off means the
device is not working properly;
c) U1 ~ U8: NO.1 to 8 user interface working indicator, green. FXS port: being on when ring or pick up the phone;
FXO port: being on when ring or pick up, being off when hang up or pick off the phone;
d) LNK1 and LINK2: No. 1 and No.2 Ethernet connect / data receiving indicator, green. Being on when the
connecting is normal, or off, flashing when receiving data;
e) LNK3: No. 3 Ethernet connecting indicator, green. Being on when the connecting is normal, or off.
f) SPD1 and SPD2: No. 1 and No.2 Ethernet rate indicator, green. Being on when the rate is 100M,being off when
the rate is 10M;
g) SPD3: No. 3 Ethernet data receiving indicator, green, flashing when receiving data;.
