MG6000 Series Media Gateway User
’
s Manual
- 57 -
MAC address: 00:03:0a:0b:0c:0d
Default gateway IP address: 192.168.0.221
5.1.4.2
DHCP client parameters
a). Configuration
IAD(8)#
set dhcpclient
-> Enable DHCP client ?'yes' or 'no'[no]:yes
-> Use special DHCP server? 'yes' or 'no'[no]:yes
-> Special DHCP server [0.0.0.0]:138.0.0.221
Must reset to take effect
b). Display
IAD(8)#
show dhcpclient
DHCP Configuration
：
Enabled
=============================
DHCP client Status:Enabled
Client End IP Address........:138.0.221.18
Client End Net Mask......:255.255.0.0
DHCP Server IP Address....:138.0.0.221
First DNS IP Address........:61.144.56.101
Second DNS IP Address........:0.0.0.0
Default Gateway IP Address......:138.0.0.221
Dhcp sip server......
：
no information
Position of device............
：
no information
5.1.4.3
PPPoE client parameters
Attention
：
MG6032 do not support PPPoE
a). Configuration
IAD(8)#
set pppoe
-> Enable PPPoE client in this gateway? 'yes' or 'no':yes
-> Please input PPPoE user name[]:beijing2008_1
-> Please input PPPoE user password []:beijing2008_1
-> Please input PPPoE server name []:
-> Please input PPPoE service name []:
-> Output debug information?'yes' or 'no'[no]:
b). Display
IAD(8)#
show pppoe
PPPoE client: Enabled
PPPoE client status: Connection successfully
User name: beijing2008_1
User password: beijing2008_1
Server name: kingchaoying.localdomain
Service name:
