MG6000 Series Media Gateway User
’
s Manual
- 81 -
b). Display
IAD(8)#
show digitmap
Digit Map:[2-9]11|0T|011xxx.T|91[2-9]xxxxxxxxx|[1-8]xx
T Timer:10s
Routing IP Address:138.0.0.221
Routing Port:5060
c). Display the routing map which is established by the digitmap
IAD(8)#
show gw-table
--------------------------------------------------------------------------------
No. |Prefix Code|Len |Type|IP Address |Port|Cut |Extra Code |PhoneContext
0 *11 3 SIP 138.0.0.221 5060 0
1 0 255 SIP 138.0.0.221 5060 0
2 011 255 SIP 138.0.0.221 5060 0
3 91* 12 SIP 138.0.0.221 5060 0
4 * 3 SIP 138.0.0.221 5060 0
--------------------------------------------------------------------------------
Total item:5
5.1.12
Extended Service
5.1.12.1
Extended Service
a). Configuration
IAD(8)#
set extended-service
->Tap+Digit means to pat the spring first then press digit, ^(Shift+6) means to
pat the spring!
->Use '#' key as dial out(0-no, 1-yes)[1]:1
->use '*' key for special function (0-no, 1-yes)[0]:0
->If Tap key need to send up(0-no, 1-yes)[0]:0
->If special key use Escape Sequence(0-no, 1-yes)[0]:0
->If enable snatch function 'yes'or'no'[yes]:yes
->Snatch key[*]: *
->If enable transfer function 'yes'or'no'[yes]:yes
->Transfer key[Tap+4]: Tap+4
->If enable callhold function 'yes'or'no'[yes]:yes
->Callhold answer incoming call key[Tap+2]: Tap+2
->Cancel Callhold call key[Tap+1]: Tap+1
->If enable threeway calling Function 'yes'or'no'[yes]:yes
->Threeway calling function key[Tap+5]: Tap+5
->If enable conference Function 'yes'or'no'[yes]:yes
->URL of conference[]: [email protected]
->conference dial number[200]: 200
->conference start key[Tap+3]: Tap+3
->conference dialling Function key[^]: ^
->conference dialling cancel key[^]: ^
->If Enable Mailbox Function 'yes'or'no'[no]:no
