MG6000 Series Media Gateway User
’
s Manual
- 52 -
Fig. 4
–
20 system tool
All kinds of users could enter this page; super user have the authorization to configure all in this page, senior
users have the authorization to configure
“
Save current settings
”
,
“
Load last settings saved from flash
”
,
“
Reset the
IAD to factory default configuration
”
, and
“
Reboot System
”
; and the common users haven
’
t the authorization to
configure at all..
The parameters show as below.
a). Save current settings to flash: save the new configuration to the FLASH in IAD. The parameters will
keep even being rebooting.
b). Load last settings saved from flash: execute this operation if user would like to use the latest parameters
saved in flash;
c). Reset the IAD to factory default configuration: recover the default configuration.
d). Reboot System: Click to reboot the IAD; please log in the web network management again after reboot.
e). Backup configuration over TFTP (IAD -> PC): load the configuration saved in flash from IAD to local
PC.. It
’
s shown as Fig 4-21.
