![background image](http://html1.mh-extra.com/html/ganz/cdr-16t/cdr-16t_operation-manual_3417840104.webp)
98
⑥
TOTAL REC TIME
Shows total possible min. recording time for connected hard disks assigned PB/REC USE.
u
Special Button Functions:
Button
Description
ENTER
ID # selected
Goes to [HDD INFORMATION] sub menu
for selected drive (push ENTER again to
return to this menu)
7-3-2. Specified HDD
This sub menu is accessed when a SCSI ID number in the [HDD INFORMATION] menu is
selected and ENTER is pushed. It contains information concerning the selected hard disk.
Settings cannot be changed via this menu. Push ENTER again to return to previous menu.
Where:
①
SCSI ID
Shows ID number assigned to hard disk.
②
MODEL NAME
Shows hard disk model (name / number).
③
VENDOR NAME
Shows hard disk manufacturers name.
④
REC TIME
Shows min. record time possible for hard disk. Time shown here is for realtime recording
(NTSC 60 fields / sec., PAL 50 fields / sec.) with quality set to SUPER. Lower quality setting
and / or different record interval settings will allow user to extend hard disk recording time.
(Note that this display will always show
minimum
record time possible.)
(Continued following page.)
⑥
[HDD INFORMATION]
SCSI ID –
#0
MODEL NAME –
MAJ3364MC
VENDOR NAME –
FUJITSU
REC TIME –
2H34M
STATUS –
HDD ERROR 1-2345
RECORD TERM
START
12/28/2000 : 00:00:00(THU)
END
01/05/2001 : 07:30:25(FRI)
EXIT
( Note that NTSC format shown above (M/D/Y). PAL time display is D/M/Y.)
①
②
③
④
⑤