134
⑦
RECORD TERM
Start and stop time of total record time on DVD-RAM disk is displayed.
⑧
EXIT
Used to escape from this display (cursor select, then push ENTER).
9-11. Other Settings
u
LOOP REC
Sets whether record operations stop when DVD is full (OFF) or return to timeline start and
overwrite DVD contents (ON)
for DVD disk assigned PB / REC USE status.
If LOOP REC set
to OFF, after the
DVD disk
recording capacity is reached recording will stop. Pressing Record
button again will begin recording over previously recorded material.
u
END ALARM
Used to warn user that record operations are at the end of the DVD disk. DVD disk address (if
monitor displayed) will flash when recording within end percentage (of disk capacity) set here.
Can be set from 20% disk space remaining to 1% (end of DVD disk). Set to 0% to turn this
warning OFF.
u
DVD ALARM OUT
Used to set alarm signal output ON / OFF to alert user of DVD condition.
ERROR
Alarm signal output when DVD error occurs.
EVENT
Alarm signal output when event error occurs.
END
Alarm signal output when DVD end capacity is reached.
