![background image](http://html1.mh-extra.com/html/ganz/cdr-16t/cdr-16t_operation-manual_3417840010.webp)
4
④
CAMERA SELECT 1
−
16
Used to select any single camera for full screen display or to assign cameras to positions in split
displays. (See sec. ‘6-2. Split Position’.)
⑤
CHANNEL GROUP SELECT A
−
F
Used to select which channel group of a split display pattern is used when viewing camera video
in SPLIT mode. Same type pattern channel groups (See sec. ‘4-5-2. Channel Groups’.) can be
auto sequenced using
③
. Note that display pattern setting at
⑥
is needed and
⑦
must be
flashing (split select mode) for setting here to be valid.
⑥
Used to select which split display pattern is used when viewing camera video in SPLIT mode.
Note that channel group setting at
⑤
is needed and
⑦
must be flashing (split select mode) for
setting here to be valid.
⑦
SPLIT button
Sets split display select mode (button flashing) ON. After entering split display select mode (this
button flashing), settings
⑥
(split pattern) and
⑤
(channel group) can be selected. Split display
select mode ends (this button stops flashing) when selection is made at
⑤
or
⑥
or after approx.
5 sec. have elapsed. (See sec. ‘4-5. Split Screen Display Operations’.)
⑧
CH (channel) button
Used to select camera displayed at main position in split pattern when in SPLIT mode. (See sec.
‘4-5-3. Changing Main Position Camera’.)
⑨
ZOOM button
Used for x2 zoom in of selected area in camera scene when operating in full screen display
mode. (See sec. ‘4-4-1. Zoom’.) Cannot be used in SPLIT mode.
⑩
LV (live) / PB (playback) button
Used to select live view display of camera video or playback of previously recorded video.
Button will be lit when in LIVE view mode.
⑪
MENU button and indicators
Used to select normal or menu mode operation of unit. Top indicator will be lit when CDR-16T is
operating normally, bottom indicator is lit when in MENU mode. (See sec. ‘5. Using Menus’.)
Note that MENU mode select switch is recessed into the front panel. Switch should be carefully
pushed with a non-metallic probe tool to change between MENU / normal operation mode.
⑫
FUNC button
Used to access FUNCTION menu. (See sec.’5-2. Accessing Function Menus’.)
⑬
REC /
↓
button
Used to initiate REC operation when unit is in OPERATION mode.
Or
Used to change between menu selections when in MENU mode.
⑭
STOP /
↑
button
Used to STOP record operation when unit is in OPERATION mode.
Or
Used to change between menu selections when in MENU mode.
(Continued following page.)