21
Where:
Display
Description
SUP
Super (Best resolution on playback)
HI
High
NOR
Normal
LOW
Low (Lowest resolution on playback)
(
※
See sec. ‘6-3. Record Programming’ for information on record QUALITY.)
⑧
HD Address
If playback view, shows hard disk ID no. and time point information. If live view (not recording),
shows hard disk ID no. and time point where previous recording stopped, next recording will
start. If live view (recording), shows hard disk ID no. and time point passage while recording.
Where:
Display
Description
1H10M30S (counter)
Relative time from HD start point
50% (percent)
Remaining percentage of HD available for recording
(whole numbers)
Note
Counter can be set to count up or count down mode. (See sec.
‘6-8. Display Mode’ for details on counter operation settings.
⑨
Alarm Index
If playback view, shows alarm index of image currently monitor displayed if image recorded
under alarm conditions.
If live view, alarm index (for type of alarm occurring) will appear when alarm occurs for
camera currently monitor displayed.
Where:
Display
Description
A
Alarm
Alarm signal input.
L
video Loss
Video signal loss.
S
Sensor
Alarm input from sensor card.
V
image reVersion
Image returns (to video loss channel) during record.
R
Record start
Time point where recording started.
M
Manual
Alarm manually initiated. (REC button pushed during
recording.)
Note
V, R and M alarm indexes mark a single time point and
are only screen displayed for a short time. See sec. ‘7-2.
Index List Search’ for more information on alarms.
