![background image](http://html1.mh-extra.com/html/ganz/cdr-16t/cdr-16t_operation-manual_3417840051.webp)
45
STOP
JOG/SHTL
CONTROL
PLAY
ENTER
FUNC
Where:
①
PASSWORD
Sets a four-digit password to be used to access MENU mode. Use CAMERA SELECT number
buttons 1
−
9 to enter password.
②
PASSWORD LOCK
Sets if password required to access MENU mode and change operational settings.
OFF
No password required. (Factory setting.)
ON
Password required. See sec. ‘6. MAIN Menu Settings’.
Important
Do not forget your password. If password is forgotten,
resetting to defaults will clear password setting and allow
you to access MENU mode.
Note that resetting to defaults will also clear all settings
currently made. See sec. ‘4-2. Resetting to Factory
Defaults’ to reset defaults.
③
KEY PROTECT
Sets which front panel buttons are locked out (disabled) from use.
OFF
All front panel buttons can be used. (Factory setting).
CONTROL
Control group buttons only (shown below) locked out.
ALL
Only MENU button can be used. All other buttons locked out.
④
COVERT
Sets whether camera channels set to ON at
⑤
appear at the display monitor or not. (Camera
hidden from observation during live or playback, full or split view.)
OFF
All cameras displayed at monitor as normal. (Factory setting.)
ON
Black displayed at monitor for channels set to ON at
⑤
in this menu.
Important
Covert channels will be monitor displayed when alarm is
input and ALARM DISPLAY in ALARM / LOSS menu is
ON. See sec. ‘6-9. Alarms’.
To view covert channels live or playback recorded
material, covert setting must be set to OFF.
(Continued following page.)