56
Where
:
Each channel updated / not recorded according to setting made here.
NORM
Record at normal update frequency.
FAST
Record at fast update frequency.
SKIP
Camera channel will be skipped and not recorded.
SENS
Record at fast update frequency when sensor alarm input, normal
update frequency when sensor alarm not input.
Important
If any channels are set to FAST or SENS here, UPDATE
MODE record interval cannot be selected. (Only
TIMELAPSE MODE can be selected.)
Max. number of channels that can be set to FAST is 7 and
number of FAST channels set cannot exceed the number
of NORM / SENS channels set. WARNING monitor
displayed if allowable number of FAST channels is
exceeded.
If no video exists (no input signal to CDR-16T) for a given
camera channel, the channel will be automatically
skipped (not recorded) regardless of setting made here.
u
Example 1:
NORM: CH1 – CH6
SKIP: CH7 – CH16
Record interval: TIMELAPSE MODE 0.10 sec.
In this case, one field will be recorded for each channel, with a timelapse (record interval) of
0.6 sec. (switchover time of 0.1 sec. x 6 channels) between each recorded field as shown
below.
Time =
0.1
0.1
0.1
0.1
0.1
0.1
0.1
CH =
1
2
3
4
5
6
1
Timelapse of 0.6 sec.
(Continued following page.)
