![background image](http://html1.mh-extra.com/html/ganz/cdr-16t/cdr-16t_operation-manual_3417840131.webp)
125
Note
This sub menu cannot be accessed if:
Ø
Hard disk record in progress
Ø
Event to ‘0’ (No events on disk)
⑤
Move cursor to YES, then push ENTER button to clear backup memory information.
or
Move cursor to NO, then push ENTER button to not clear information.
⑥
After ENTER button is pushed, display returns to the DVD INFORMATION menu. Move
cursor to EXIT, then push ENTER button to quit display.
9-6-5. Auto Backup Interrupt
AUTO BACKUP operation can be manually interrupted (paused) by the user and restarted if
needed. (if user wants to change disk before maximum capacity reached, for example.)
u
To interrupt Auto Backup
①
Verify CDR-16T in normal operation mode (Main/sub menus not displayed).
②
Push FUNC button to open Function menu.
③
Move cursor to DVD INFORMATION, then push ENTER button. The DVD
INFORMATION menu below should open.
④
Move cursor to BACKUP and push
→
button or push
→
button and turn JOG /SHTL to
change ENABLE to DISABLE to disable the auto backup sequence.
⑤
Move cursor to SET, then push ENTER button.
[DVD INFORMATION]
MODEL NAME - DVD-RAM DRIVE
VENDOR NAME - MATSUSHITA
CAPACITY- 4.4G BYTE
STATUS-NOT ASSIGNED
BACKUP - ENABLE
WAITING - 0 POINT
RECORD TERM
START 05/23/2001
21:24:30(MON)
:
END
05/23/2001
21:24:35(MON)
SETEXIT
(
※
Note that NTSC format shown above (M/D/Y). PAL time display is D/M/Y.)