71
6-7. Date / Time Settings
This menu lets you set the initial time reference recorder operations will start and continue from
in the future. See sec. ‘5-1. Accessing MAIN Menu’ for information on making menu selections.
Where:
①
DATE / TIME
Sets date and time reference used by CDR-16T.
②
ADJUST
Sets which recorder is used to adjust time reference For all recorders when multiple units
configured. (See sec. ‘3-2-2. Remote Connector’ for pin assignment tables.)
MASTER
Master unit outputs a pulse at each 00 sec. count to other configured
(SLAVE) CDR-16T. (Sent from REMOTE connector pin no. 35.)
SLAVE
CDR-16T count will adjust to 00 sec. every time a pulse is received
from the MASTER unit. (Received at REMOTE connector pin no. 34.)
①
②
(
※
Note that NTSC format shown above (M/D/Y). PAL time display is D/M/Y.)
[DATE/TIME]
01/01/2000
04:35:50 (SAT)
ADJUST – SLAVE
SET
EXIT
