Configuration settings in the OSD
G&D DP1.2-MUX3-ATC ·
42
English
4. Use the
arrow keys
to select a video channel (
CPU1.x
to
CPU 3.x
) and press
Enter
.
5. Use the
arrow keys
to select
Edid profile
and press
Enter
.
6. Use the
arrow keys
and
F8
to select between the following options:
7. Press
F2
to save your settings.
Using the Freeze mode
If the cable connection between the computer and the KVM switch is interrupted
during operation, no image is displayed on the monitor of the workstation (default).
Activate the Freeze mode if you want to display the last image received at the KVM
switch until the connection is restored in case of a disconnection..
How to configure the setting of the Freeze mode:
1. Press
Ctrl+Num
(default) to open the on-screen display.
2. Press
F11
to open the configuration settings.
3. Use the
arrow keys
to select
CPUs
and press
Enter
.
4. Use the
arrow keys
to select a video channel (
CPU1.x
to
CPU 3.x
) and press
Enter
.
5. Use the
arrow keys
to select
Edid profile
and press
Enter
.
Auto:
Automatic handling of EDID data (default)
Profilname:
Selection of an EDID profile previously imported by a user
ADVICE:
In order to clearly signal the disconnection, the last received image is
optionally displayed with a coloured frame and/or the time since the disconnec-
tion.
