Configuration settings in the OSD
G&D DP1.2-MUX3-ATC ·
32
English
5. Select the switching options to be blocked by selecting the line by pressing
F8
:
6. Press
F2
to save your settings.
Changing scancode sets of a PS/2 keyboard
When a key on the PS/2 keyboard is pressed, the keyboard processor sends a data
packet called scancode. There are two common scancode sets (sets 2 and 3) that
contain different scancodes.
By default, the KVM switch interprets all entries of a PS/2 keyboard with the scan-
code set 2.
How to change the setting of a scancode set:
1. Press
Ctrl+Num
(default) to open the on-screen display.
2. Press
F11
to open the configuration settings.
3. Use the
arrow keys
to select
General
and press
Enter
.
4. In the
Scancode Set
field select one of the following options by pressing
F8
:
5. Press
F2
to save your settings.
Front buttons:
Switching via buttons on the front panel of the device
disabled
IP-API & EasyControl:
Switching via IP API and
EasyControl
disabled.
Serial:
Switching via serial device disabled.
Hotkeys:
Switching via select keys and step keys disabled.
Selectkeys:
Switching via select keys disabled.
Step/Scan Up:
Switching via step key
Up
disabled
Step/Scan Down:
Switching via step key
Down
disabled
ADVICE:
If the pipe ("|") cannot be entered or the arrow keys of the keyboard do
not work as expected, it is recommended to switch to scan code set 3.
2:
Activates scancode set 2 for entries of PS/2 keyboards
3:
Activates scancode set 3 for entries of PS/2 keyboards
