Configuration settings in the OSD
33
· G&D DP1.2-MUX3-ATC
Reinitialising USB input devices
Once you connect a USB keyboard or mouse to the KVM switch, the input device is
initialised and can be used without restrictions.
The USB connection of some USB input devices needs to be reinitialised after a cer-
tain time. Activate the automatic reinitialisation of the USB input devices if a USB
keyboard or mouse no longer reacts to your inputs during operation.
How to enable/disable the reinitialisation of USB input devices:
1. Press
Ctrl+Num
(default) to open the on-screen display.
2. Press
F11
to open the configuration settings.
3. Use the
arrow keys
to select
General
and press
Enter
.
4. In the
USB auto refresh
field select one of the following options by pressing
F8
:
5. Press
F2
to save your settings.
Enabling/disabling DDC/CI support
The KVM switch has been prepared to support monitors with
DDC/CI
function. After
the function has been activated, the
DDC/CI
information is transparently forwarded to
the monitor to support as many monitors as possible.
How to configure DDC/CI transmission:
1. Press
Ctrl+Num
(default) to open the on-screen display.
2. Press
F11
to open the configuration settings.
Off:
Connected USB input devices do not require reinitialisation.
All:
All USB devices are reinitialised regularly.
Only faulty:
The status of the USB devices is monitored.
If communication to a USB device is disturbed, this device
is reinitialised (
default setting
).
NOTE:
Support cannot be guaranteed for all monitors.
NOTE:
DDC/CI
transmission is set separately for each video channel of the KVM
switch. For multichannel devices, the following option can be set separately for
each video channel.
