Technical Data
3:2
AK 95 HCEN9135 Rev. 10.2005
Machine specification AK 95, K18022
Blood flow control
Double needle
Flow rate:
0 and
20 - 500 ml/min (-150 mmHg prepump pressure,
pump segment diameter 7.9 mm)
Flow accuracy:
±10 ml/min or ±10 %, whichever is largest
Accumulated blood volume:
0 - 999 litres
Volume accuracy:
±10 %
Single needle
Flow rate:
0 and
20 - 500 ml/min (-150 mmHg prepump pressure,
pump segment diameter 7.9 mm)
Flow accuracy:
±10 ml/min or ±10 %, whichever is largest
Time control:
2 - 20 seconds, arterial and venous time.
Pressure control:
10 - 500 mmHg ( ±5 mmHg or ±3 %, whichever is largest),
venous pressure control
Accumulated blood volume:
0 to 999 litres
Volume accuracy:
±10 %
Blood pressure supervision
Venous pressure:
Operating range
-700 to 750 mmHg
Alarm limits:
10 to 500 mmHg in treatment mode,
-100 to 500 mmHg in priming mode
Accuracy:
-700 to -500 mmHg, ±10 %
-500 to 500 mmHg, ±5 mmHg or ±3 %, whichever is largest
500 to 750 mmHg, ±10 %
Arterial pressure:
Operating range
-700 to 750 mmHg
Alarm limits:
-700 to 750 mmHg
Accuracy:
-700 to -500 mmHg, ±10 %
-500 to 500 mmHg, ±5 mmHg or ±3 %, whichever is largest
500 to 750 mmHg, ±10 %
Summary of Contents for AK 95 S
