Gambro AK 95 S, Service Manual

Page: 99 / 247

4:26
AK 95 / AK 95 S Service Manual
HCEN 9136 Rev. 10.2005
Service Technicians Guide
Display the logging parameters on the
information display see e.g. below:
This logging setup is automatically
stored and shows up next time
internal logging starts.
LOGGING ORI-001 ORB-000 ORB-000
DISPLAY xxx xxx xxx
Select infor-
mation display
field (0-2)
The logging setups is
automatically stored
in SAFERAM.
SELECT LOGGER FACILITY
Internal Errors Time Progver
INTERNAL LOGGING SELECTION
Display Set-up A Set-up M
(See "Memory")
Use the Set knob when you want to
set the parameters.
Setting PAR-INH (PARameter
INHibit) to ON prevents the logging
display from disappearing if the
Blood Flow knob is touched or a
parameter button (Temp, Cond, etc)
is pressed.
Determines position of decimal
point (or displays in HEX). Not
necessary for S-arrays, see
"Arrays", page 4:28
Select array index (000 - 999).
Select the array to be displayed
(see "Arrays", page 4:27)
In which field the logged
parameter will appear.
Display
name
Logging mode flow diagram
Shows total
run time
Shows program
version.
When selecting logging
this information will be
displayed:
See next page,
Error buffers in
Logging mode
SET-UP PAR-INH FIELD
Array On 0
Parameter
inhibit.
("ON or
"OFF")
FIELD ARRAY INDEX FORMAT
0 SRI 000 1