Gambro AK 95 S, Service Manual

Page: 106 / 247

5:3
AK 95 / AK 95 S HCEN12189 Rev. 10. 2006
Maintenance Manual
Test equipment needed to perform maintenance.
Test equipment
Test equipment: Tolerance: Manufacturer: Gambro Order
number:
Conductivity measurement ± 0.1 mS/cm MESA, IBP
Pressure measurement ± 2mmHg to ± 200mmHg
± 1% beyond ± 200mmHg
If BPM is installed:
± 0.8mmHg
MESA, IBP, Druck
Temperature measurement: ± 0.2ºC MESA, IBP
Digital Voltmeter ± 0.5% Fluke
Measuring glass ± 5 ml
Blood leak Calibration
Cover N/A Gambro K40169001
Gauge pin kit for blood pump rollers
(including three different pins) T = 1.1 (Stop pin = 1.1*2*0.7 = 1.5mm)
T = 1.6 (Stop pin = 1.6*2*0.7 = 2.2mm)
T = 2.0 (Stop pin = 2.0*2*0.7 = 2.8mm)
T = wall thickness of the blood tubing
Gambro K40158001
Gauge pin kit for blood pump rollers
(to be ordered separately) T = 1.1 (Stop pin = 1.1*2*0.7 = 1.5mm)
T = 1.6 (Stop pin = 1.6*2*0.7 = 2.2mm)
T = 2.0 (Stop pin = 2.0*2*0.7 = 2.8mm)
T = wall thickness of the blood tubing
Gambro K40158002
K40158003
K40158004
Calibration tube kit N/A Gambro K13983002
Drip chamber N/A
Tube for calibration of
priming detector N/A
Safety tester According to IEC 60601-1 Rigel, Biotec,
Metron
*BPM test equipment N/A Gambro K22151001
*BPM Cuff N/A Gambro 100900141
*pH buffers ± 0.07 pH units pH 7 – 100810001
pH 9 – 100810002
Magnet for blood pump cover Gambro K19049001
* If installed