GalileoSky Base Block User Manual Download

Page: 99 / 102

User Manual Galileosky Base Block

The tracking device should be configured so that the head pack (HeadPack) contains
information about the tracker`s version (HardVersion), firmware version (SoftVersion), unique
15-digit GSM/3G-unit identifier

(IMEI), device`s user ID (ID device).

Correspondent tag mask: 00000000000000000000000000000001111.

To apply the settings we should use the following command

HeadPack 00000000000000000000000000000001111, or omitting zeros, HeadPack
1111

Example2.

the device`s user ID (ID device), packet number (NumberOfPacket), date and time of packet
record

(TimeDate),

coordinates

are

sent.

Correspondent

tag

mask:

00000000000000000000000000001111000

To apply the settings, we should use the command: MainPack 1111000.

In this case, we have omitted zeros at once.

Summary of Contents for Base Block







































































































Search results

Summary of Contents for Base Block

Reviews:

Related manuals for Base Block

Brands by name

Popular brands

GalileoSky Base Block, User Manual

Search results

Summary of Contents for Base Block

Reviews:

Related manuals for Base Block

Brands by name

Popular brands