User Manual Galileosky Base Block
92
Command format
PhotoCfg t1,t2,mode,res,confirm
Parameters
t1 –periodical shooting interval, [sec]. Photos are saved only to the SD-card, 0 – shooting
only by event;
t2 – shooting interval [sec]. Photos are saved to the SD-card and sent to the server, 0 –
shooting only by event;
mode – periodical shooting in geofences:
0 – photos are taken regardless of geofences;
1 – photos are taken only inside geofences;
2 – photos are taken only outside geofences.
res – picture resolution:
0 – 640х480 points;
1 – 320х240 points.
confirm – waiting for a confirmation of a picture reception from the server:
0 – do not wait;
1 – wait.
Explanation
Settings of a periodical camera shooting, picture format and image transfer protocol..
Example
Request: PhotoCfg 5,150,0,0,0
Reply: PHOTOCFG:WrPeriod=5,SendPeriod=150,Type=0,Size=0,Confirm=0;
Command format
CleanPhotoQueue n
Parameters
n – port number to which the camera taking photos is connected:
0 – RS232[0],
1 – RS232[1]
2 – RS485.
Explanation
Mark all photos as sent.
Example
Request: CleanPhotoQueue 0
Reply: Photo queue is cleaned
