User Manual Galileosky Base Block
32
6.
Evaluate the quality of the picture in the Configurator or eject the microSD card from the
tracking device and connect it to PC. Pictures from the camera are saved in the catalogue
Pic\RS4850. A separate catalogue is created for each date; file names reflect the time
when the shots were taken.
7.
Reinsert the microSD card.
Connecting 1Wire sensors
Can be applied only for modifications equipped with 1-Wire interface.
It is possible to connect different sensors working via 1-Wire interface, and they can operate
simultaneously.
Connecting iButton (DS1990, DS1982) identification key
There are several identification key (IK) applications:
driver identification;
trailer detachment identification;
doors opening identification.
In the same way, it is possible to connect devices emulating iButton, for example, RFID-codes
readers.
The tracking device can support up to 8 identification keys with certain identifiers or two
identification keys with any identifier. When using a microSD card up to 1000 IK with certain
identifier are supported.
By identification key applying to 1-Wire and GND contacts (
Contacts description
) the key
number is entered into the memory, the point is recorded and four lower bytes are sent to the
server without checksum. By key disconnection, the number turns to zero, the point is recorded
and message is sent to the server. Keys having code less than 100000 are stored in iButton[1]
field. By iButton detachment from the tracker, key value is set to zero in the memory cell in 4
seconds, message with the zero code is transmitted to the server. For keys with the code less
than 100000, timeout from detachment to setting to zero of the memory cell is 25 minutes.
Timeout for setting to zero can be set by IBCFG command (section
Digital inputs setting
) or in
the Configurator on «Settings»\«Digital inputs» tab.
