Gako Unguator e/s, Operating Instructions Manual

Page: 17 / 52

17
UNGUATOR
®
Mixing System
The 200 ml UNGUATOR ® Jar be-
comes a convenient transfer device
to smaller UNGUATOR
® Jars when
their UNGUATOR ® Jar bottoms are
carefully pressed towards the work
surface using an UNGUATOR
®
applicator screwed on a 30 ml
UNGUATOR
®
Jar.
In addition to the UNGUATOR
®
Coupling, required for transfer from
a from a 300 ml or 500 ml UNGU-
ATOR
®
Jar into a smaller UNGU-
ATOR
®
Jar, both the UNGUATOR
®
spindle and the AirDynamic
®
System
may also be used. Dispensing and
transferring a formulation via the dis-
pensing opening in the UNGU-
ATOR
® Jar Lid from the 1000 ml
UNGUATOR ® Jar is practically only
possible using the AirDynamic ® Sys-
tem.
We recommend transferring the formulation as soon after mixing as possible, since
the formulation has then hardly cooled and is still warm and less viscous.
1.3.7 AirDynamic
®
System
The AirDynamic
®
System optimizes batch preparation within the closed system:
• contamination-free transfer
• contamination-free storage
The AirDynamic
®
System has been designed to use UNGUATOR
®
Jars from 300 ml to
1000 ml for dispensing mixtures. An adapter connected to a pump ball is affixed the
center hole on the housing bottom of the UNGUATOR
®
Jar with an air-tight connection.
By pumping air into the lower chamber of the UNGUATOR
®
using the pump ball, the
pressure thus generated moves the movable bottom upward. Thanks to the AirDynamic ®
Fig. 1-15: UNGUATOR
®
Coupling
Fig. 1-14:
Transfer using a 200 ml UNGUATOR
® Jar