Gako Unguator e/s Operating Instructions Manual Download

Page: 41 / 52

Bibliography

Bibliography

[1] 1 Jahr UNGUATOR

-Rührsystem. Deutsche Apothekerzeitung (DAZ) Nr. 43

Jhg. 135/1995 S. 115-117 Konietzko, A., GAKO Konietzko GmbH, Bamberg

[2] Der UNGUATOR

- ein neuartiges Salbenrührwerk. Pharmazeutische Zei-

tung (PZ) Nr. 30 Jhg. 141/1996 S. 30-33 Alberg et al., Pharmaz. Technologie
TU Braunschweig

[3] Keimzahl in wasserhaltigen Dermatika. Pharmazeutische Zeitung (PZ) Nr.

29 Jhg. 142/1997 S. 36-40 Alberg et al., Pharmaz. Technologie, TU Braun-
schweig

[4] Alternativen zum Salbenrühren im Vergleich. Pharmazeutische Zeitung (PZ)

Nr. 36 Jhg. 142/1997 S. 24 – 31 Zobel et al., Pharmaz. Technologie, Univ.
Frankfurt a.M.

[5] Das UNGUATOR

- Rührsystem (URSY) als Alternativverfahren für die Her-

stellung dermatologischer Individualrezepturen. Deutscher Dermatologe: 46,
Heft 6 / 1998 S. 545 – 549 Zobel et al., Pharmaz. Technologie, Univ. Frank-
furt a.M.

[6] Bedienungsanleitung UNGUATOR

Rühren im geschlossenen System (1998)

A.Konietzko, GAKO Konietzko GmbH, Bamberg

[7] System zur Salbenherstellung im Vergleich. Pharmazeutische Zeitung (PZ)

Nr. 38. Jhg. 143/1998 S. 53-65 R. Eifler-Bollen, Zentrallaboratorium Deut-
scher Apotheker (ZL), Eschborn

[8] Voigt, R.: Pharmazeutische Technologie (Für Studium und Beruf), Jhg. 2000,

9. Auflage., S. 314-315, Deutscher Apothekerverlag, Stuttgart

[9] Qualitätssicherung bei Rezeptur- und Defektursalben UNGUATOR

-Techno-

logie. Apotheker & Wirtschaft Nr. 7 Jhrg. 2/2001 S. 40-41 Albrecht Konietzko,
96049 Bamberg, [email protected] Verlag: medical economics – Leip-
zig

[10] Qualitätssicherung in der Rezeptur. Pharmazeutische Zeitung (PZ) Nr. 14

Jhg. 146/2001 S. 42-47 R. Eifler-Bollen, NRF, Eschborn Prof. Dr. H. Möller,
Zentrallaboratorium Deutscher Apotheker (ZL), Eschborn, et al.

[11] Leitlinie zur Qualitätssicherung ... nicht sterilen Rezeptur- und Defektur-

arzneimittel. Pharmazeutische Zeitung (PZ) Nr. 29 Jhg. 145/2000 Seiten 105
– 116 Deutsche Apothekerkammer

[12] Flüssige Chlorhexidin-Cremes: Rühren ist kritisch. Pharmazeutische Zeitung

(PZ) Nr. 10 Jhg. 147/2002 Seiten 54 - 56

[13] Mit zeitgemäßen Herstellungsverfahren rühren. Pharmazeutische Zeitung (PZ)

Nr. 13 Jhg. 147/2002 Seite 60

Diskussion: A. Konietzko (GAKO) und Dr.

H. Reimann (NRF)

Summary of Contents for Unguator e/s





















































Search results

Summary of Contents for Unguator e/s

Reviews:

Related manuals for Unguator e/s

Brands by name

Popular brands

Gako Unguator e/s, Operating Instructions Manual

Search results

Summary of Contents for Unguator e/s

Reviews:

Related manuals for Unguator e/s

Brands by name

Popular brands