Gako Unguator e/s, Operating Instructions Manual

Page: 12 / 52

12
Fig. 1-5: UNGUATOR
®
Disp. Blade
UNGUATOR
®
Mixing System
The material contact in the ointment is three times as high as when using the Disp.
Blade compared to the UNGUATOR
®
SMB at the same mixing speed. The counter
rotating twist of the mixing blades causes intensive material vibration in the material to
be mixed and achieves good product quality faster than using the UNGUATOR
®
SMB.
We do however recommend using the same mixing time as for the UNGUATOR
®
SMB.
In the process of final quality control the mixing blade should be picked up with the
weak end of the shaft and thrown away. Cleaning is confined to the UNGUATOR
®
Disp.
Blade shaft. We recommend using the UNGUATOR
®
Disp. Blade for substances that
may discolor the regular blade. This type of UNGUATOR
®
MB also comes with diffe-
rent shaft lengths. On the weak end of the shaft, the range of UNGUATOR
®
Jar sizes
that can be used (15-100 ml and 200 ml respectively) for the application is marked for
orientation.
1.3.2 UNGUATOR
®
Jar
The UNGUATOR
®
Jar is both the mixing and the dispensing jar and is therefore
designed as an expendable or disposable jar. The UNGUATOR
®
Jar guarantees
evaporation-free and contamination-free preparation in the air-reduced mixing space.
The UNGUATOR
® Jar Lid closes the UNGUATOR ® Jar to ensure no loss of active
ingredients.
Used as a dispensing jar, the UNGUATOR ® Jar corresponds to the guidelines for quality
assurance from the German Chamber of Pharmacists (Apothekenkammer) [11]. With
its small dispensing opening, comparable to a tube and without an environmental
Fig. 1-6: Handling the
UNGUATOR
®
Disp. Blade