Gako Unguator e/s Operating Instructions Manual Download Page 16

Page: 16 / 52

UNGUATOR

Mixing System

Air can be diminuated by placing the UNGUATOR

Jar

onto the formulation table and using both hands to
move the jar against the table. The formulation can
be transferred into small UNGUATOR

Jars with the

aid of the UNGUATOR

coupling.

Before giving the UNGUATOR

Jar to the customer,

the UNGUATOR

Spindle must be screwed into the

UNGUATOR

Jar counterclockwise from the bottom

till it locks into place. The UNGUATOR

Spindle must

be turned clockwise to dispense ointment. One turn
dispenses approx. 20 ml of the contents of UNGU-
ATOR

Jar.

Caution! If the movable bottom is accidentally
perforated or the spindle locks onto the insert per-

manently then the UNGUATOR

Jar may only serve as dispensing or storage vessel

and cannot be used for the mixing process.

1.3.6 UNGUATOR

Coupling

The UNGUATOR

Coupling connects two UNGUATOR

Jars by the threads of their

dispensing openings and is very useful when preparing ointments in larger batches.
Transferring a for mulation from a larger UNGUATOR

Jar into a smaller

UNGUATOR

Jar using the UNGUATOR

Coupling will ensure that the UNGU-

ATOR

Mixing System remains uncontaminated from the mixing process to the end

user.

Fig. 1-13: UNGUATOR

Spindle

Fig. 1-11: Note on operation 1 for the

UNGUATOR

Spindle

Fig. 1-12: Note on operation 2 for the

UNGUATOR

Spindle

Summary of Contents for Unguator e/s





















































Search results

Summary of Contents for Unguator e/s

Reviews:

Related manuals for Unguator e/s

Brands by name

Popular brands

Gako Unguator e/s, Operating Instructions Manual

Search results

Summary of Contents for Unguator e/s

Reviews:

Related manuals for Unguator e/s

Brands by name

Popular brands