Gako Unguator e/s, Operating Instructions Manual

Page: 11 / 52

11
UNGUATOR
®
Mixing System
between the mixing blade and the inside wall of the UNGUATOR ® Jar which serves
primarily for the comminution of the substances during the mixing process. Additionally
forced mixing in the whole mixing space is achieved through the shape and vibration
of substances while preparing the ointment.
The lubricating effect of the foundation ointment protects the UNGUATOR
®
Jars and
the UNGUATOR
®
MB against abrasion. Discolorations of the mixing blade are mostly
irreversible and therefore harmless. All UNGUATOR
®
MBs are dishwasher safe.
UNGUATOR
®
Standard Mixing Blade (SMB)
UNGUATOR
®
SMBs are adjusted to the size of each individual UNGUATOR
®
Jar. While
the UNGUATOR
®
SMBs for 100 and 200 ml and for the 300 and 500 ml jars have the
same mixing blade diameter, their shaft length differs. This must be taken into
consideration, particularly when using the UNGUATOR
®
e/s and the UNGU-
ATOR
®
2100, since the use of the wrong length may cause problems with the automated
stroke. Always make sure the UNGUATOR ® MB used is the right length, and that it is
clean prior to use.
UNGUATOR ® Disposable Blade (Disp. Blade)
UNGUATOR ® Disp. Blade is suitable for all UNGUATOR ® devices. The mixing blade of
the UNGUATOR ® Disp. Blade is connected to the UNGUATOR ® Disp. Blade shaft by
twisting the blade counterclockwise and can be disconnected after the mixing process
with a clockwise turn.
Fig. 1-4: UNGUATOR ® SMB