Gako Unguator e/s Operating Instructions Manual Download Page 45

Page: 45 / 52

Distribution, manufacturing and customer service

GAKO Konietzko GmbH
Oberer Stephansberg 49g
D-96049 Bamberg
Germany

phon: +49 (0) 951 / 582 55
fax: +49 (0) 951 / 500 602
email: [email protected]
web: www.unguator.com

GAKO International GmbH
Dantestraße 27
D-80637 München
Germany

phon: +49 (0) 89 / 15 88 16 88
fax: +49 (0) 89 / 15 88 14 85
email: [email protected]
web: www.unguator.com

Distribution, Manufacturing and Customer

Service

Distribution and Terms of Delivery

Distribution of UNGUATOR

line products is exclusively made through wholesale firms

that either have a marketing agreement with GAKO Konietzko GmbH or GAKO
International GmbH. In Germany, the UNGUATOR

line products are also directly

marketed by GAKO Konietzko GmbH. The General Delivery Terms either of
GAKO Konietzko GmbH or GAKO International GmbH shall apply.

Customer Service

Please contact the service department of SMS Elap GmbH & Co. KG directly with all
questions pertaining to technical details, maintenance, warranty, customer service or
spare parts.

SMS Elap GmbH & Co. KG
Service-Center UNGUATOR

Am Köhlersgehäu 50
D-98544 Zella-Mehlis
Phone: +49 3682 / 455 199
Fax: +49 3682 / 455 206

Summary of Contents for Unguator e/s





















































Search results

Summary of Contents for Unguator e/s

Reviews:

Related manuals for Unguator e/s

Brands by name

Popular brands

Gako Unguator e/s, Operating Instructions Manual

Search results

Summary of Contents for Unguator e/s

Reviews:

Related manuals for Unguator e/s

Brands by name

Popular brands