Gako Unguator e/s, Operating Instructions Manual

Page: 13 / 52

13
UNGUATOR
®
Mixing System
contamination surface, the
UNGUATOR
® guarantees
the minimization of negati-
ve quality interference de-
manded by section 13,
ApBetrO (Pharmacist Ope-
rating Rules); including
those caused by germs on
the fingers when dispens-
ing the ointment. Conse-
quently, the user can re-
move the prescription oint-
ment from the UNGU-
ATOR
®
Jar very hygienically.
The UNGUATOR
®
Jar is
resistant to hot-water baths
and microwaves (temperatures less than 85 °C/185 °F). Higher temperatures (e.g.
rinsing machines) can change the tightness of the UNGUATOR
® Jar and the
displaceability of the bottom (“push-up” jars). The UNGUATOR ® material becomes brittle
at temperatures below 0 °C/32 °F.
UNGUATOR
®
Jars are available in following sizes: 15/28 ml, 20/33 ml, 30/42 ml, 50/
70 ml, 100/140 ml, 200/280 ml, 300/390 ml, 500/600 ml and 1000/1250 ml (rated
volume/filling volume).
The standard color for the UNGUATOR
®
Jar housing is white and the UNGUATOR
®
Jar
Lid is red. The 300 ml, 500 ml and 1000 ml UNGUATOR
®
Jars come with white lids. In
addition, the 20 ml to 100 ml UNGUATOR
®
Jars are available in the pastel colors pink,
light yellow, light blue and turquoise. Furthermore, UNGUATOR
®
Jars from 20 to 200 ml
can be ordered with UNGUATOR
®
Jar Lids in the special colors green, blue and white.
The UNGUATOR
®
Jar comes sealed in plastic wrap. Cleaning or disinfection prior to
use could put the tested sterility at risk. We would recommend storing the remaining
UNGUATOR
® Jars in the plastic wrap after opening for protection against possible
dust contamination.
The UNGUATOR ® Jar sizes 300 to 1000 ml are particularly well suited as storage and
transfer vessels for semisolids and other preparations. Since the contents are dispensed
using the movable jar bottom and always close to the life, The UNGUATOR
®
Jar solves
Fig. 1-7: UNGUATOR
®
Jars