manualshive.com logo in svg

Furuno FCV-38, Manual

Share
Download
Furuno FCV-38 Manual Download Page 24

1.  OPERATION

1-12

2. Click the [MODE] indication on the header. The indication is now highlighted in a 

green color.

3. Scroll to show the desired mode. The available modes depend on the [Mode] 

menu settings in the [System] menu. See section 4.7.8.
The table below lists the modes with their abbreviation (as displayed on-screen) 
along with the meaning.

* This equipment’s echo sounder.

Note: 

In the default setting, the zoom display (window) and external sounder dis-

play are not shown. If you need to add some displays, see page 4-21. Additionally, 
the image from an external fish finder can be shown on a separate monitor. See 
section 1.21.

Split beam display

This split beam display shows the underwater images captured with split beam 
technology*. The fish size graph (section 2.2) provides information on the distri-
bution of individual fish, and the target position graph (section 2.3) lets you moni-
tor the movement of individual fish. 
* A method of measuring the position and length of a single fish based on the 
phase difference of the echoes received by dividing the transducer into front and 
rear, left and right.

Beams 1 - 5 display

Images obtained by the multi-beam method (port direction, downward direction, 
starboard direction) are displayed. Simultaneous search and display in up to 5 di-
rections. The default beam direction is as shown in the table below

Note 1: 

Pair bearing and tilt angle can be changed. See page 4-15. Also, the 

beam direction indication format also can be changed. See page 4-5.

Note 2: 

The “simultaneous TX” feature permits simultaneous search. See page 4-

12.

Abbreviation

Meaning

[SB]

Split mode display*. See below.

[B1] - [B5]

Beams 1 - 5*. See below.

[BL]

Bottom Lock mode. See section 1.13.1.

[BZ]

Bottom Zoom mode. See section 1.13.2.

[MZ]

Marker Zoom mode. See section 1.13.3.

[BD]

Bottom discrimination mode. See section 1.13.4.

[HE]

External HF sounder.

[LE]

External LF sounder.

Display

Beam direction

(B: pair bearing angle, T: tile angle)

Remarks

Beam 1

B: 90°, T: 10°

Starboard direction

Beam 2

B: 270°, T: 10°

Port direction

Beam 3

B: 90°, T: 20°

Starboard direction

Beam 4

B: 270°, T: 20°

Port direction

Beam 5

B: 0°, T: 0°

Downward direction

[MODE] indication

㻹㻻㻰㻱

㻿㻮

Summary of Contents for FCV-38

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands