manualshive.com logo in svg

Furuno FCV-38, Manual

Share
Download
Furuno FCV-38 Manual Download Page 95

4.  ADVANCED SETTINGS

4-13

4

Menu item

Description

[

Std

]

[TX Power]

When using more than one fish finder with the same frequency, in 
close proximity, interference can occur. To reduce the interference, 
you can reduce the transmission power by lowering this setting. To 
disable this fish finder, set this item to [Off].

[TX Freq]

Shifts the frequency slightly when interference from other sonars or 
fish finders occur.

[TX Pulse]

Sets the TX pulse length. A short pulse offers better resolution while 
longer pulses give better long-range detection.

[Envelope Edge 
Width]

Suppresses interference to acoustic equipment such as fish finders 
and scanning sonars, etc. (your own and others).

[RX Band]

Sets the RX band width. The choices are [Narrow], [Std], [Wide], or 
[Manual]. 

[RX Band Width]

Set the RX band width manually, when [RX Band] is set to [Manual].

[TX Cycle]

Changes the rate at which the echo sounder transmits a pulse. Ad-
just this setting to erase false seabed echoes which may appear be-
tween the surface and the actual seabed.This item cannot be 
changed (it is greyed out) when the TX cycle is automatically select-
ed or the TX pulse width is 100 msec or less.

[

Deep Mode

] (The following items are valid when [Deep Mode] in the [TX/RX] menu is 

set to [Auto].)
[TX Power]

When using more than one fish finder with the same frequency, in 
close proximity, interference can occur. To reduce the interference, 
you can reduce the transmission power by lowering this setting. To 
disable this fish finder, set this setting to [Off].

[TX Freq]

Sets the TX frequency. Shift the frequency slightly when interfer-
ence from other sonars or fish finders occur.

[Deep Mode 1]

[Frequency Sweep Width]: Frequency sweeping (modulating the 
frequency around the center frequency) makes the echo sounder 
less susceptible to noise and makes it easier to detect long distanc-
es. If the sweep width is too wide, the frequency range to be used 
is widened, making the sounder susceptible to interference with 
other equipment.
[TX Pulse]: Set the TX pulse length. A short pulse offers better res-
olution while longer pulses give better long-range detection
[TX Cycle]: If interference appears on the display, adjust this item 
to reduce the interference. 

FCV-38[ver 0252473-xx.xx]

Summary of Contents for FCV-38

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands