manualshive.com logo in svg

Furuno FCV-38, Manual

Share
Download
Furuno FCV-38 Manual Download Page 27

1.  OPERATION

1-15

1

1.6

Picture Advance

The picture advance speed determines how quickly the echoes are displayed on-
screen. When setting a picture advance speed, keep in mind that a fast advance 
speed will expand echoes horizontally on the screen and a slow advance speed will 
contract them. A fast advance speed is useful for observing a rugged seabed closely. 
A slow advance speed is useful for observing a smooth seabed.

Note: 

When the ACCU-FISH

™

 feature is active, the picture advance speed may be 

slowed.

1.6.1

Picture advance for FCV-38 and external echo sounders where 
"External Fish Finder Window" is set to "Off" at installation

Where [External Fish Finder Window] is set to [Off] at installation, the picture advance 
setting is applied to both the FCV-38 and the external fish finder.

1. If the header is not displayed, put the cursor at the top edge of the display to show 

it.

2. Click the [ADVANCE] indication on the header. The indication is now highlighted 

in a green color.

3. Scroll to select the appropriate advance speed. The table below lists each speed 

with a description.

[ADVANCE] 

indication

Description

[STOP]

Picture is "paused".

[1/16]

One sixteenth of the normal speed.

[1/8]

One eight of the normal speed.

[1/4]

One quarter of the normal speed.

[1/2]

Half the normal speed.

[

×

1]

Normal speed.

[

×

2]

Twice as fast as normal speed.

[

×

4]

Four times as fast as normal speed.

[

×

8]

Eight times as fast as normal speed.

Fast

Slow

CAUTION

Neither the picture nor the depth 
indication is  refreshed while the picture 
is stopped. Use of depth data for 
navigation in this case could lead to 
grounding or other dangerous situation.

RANGE

40

x1

ADVANCE

[ADVANCE] indication

SB

RANGE

40

Summary of Contents for FCV-38

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands